SG 14

SpaceGuard™ SERIES


SG 14
Self-Contained Light Curtains

Self-Contained Light Curtains

Light Curtains


  • 1-10 metre sensing range
  • 16 to 56 parallel beams
  • Active height of 695 mm to 2535 mm
  • Detector length of 850 mm to 2800 mm
  • Cable or plug connection
  • Automatic sensitivity adjustment
  • Water-resistant slim line (12x30 mm) or leading edge (38.4x14 mm) detector housing
  • Power, output and signal status indicators
  • 12-36 V dc supply voltage
  • Dynamic sequential blanking function
  • 5 wire, solid state relay output
  • Test input
  • UL325 approved series optionally available (see datasheet for SG 14 U series in Downloads)
  • Available with optional Atex approval upon request
    (II3G Ex nA IIC T6 Gc and II3D Ex tc IIIC T80º Dc)

  • SG 14

    SG 14

  • SG 14 with parallel light beams

    SG 14 with parallel light beams

  • Light curtain C-profile shown with indicators on

    Light curtain C-profile shown with indicators on

The SG 14 light curtain system consists of a self-contained transmitter detector, SGT and receiver detector, SGR, which are to be positioned opposite of each other. The detectors are housed in a sturdy aluminium profile available in a water-resistant slim line design (12 x 30 mm) or leading edge design (38,4 x 14 mm).

The SGR is supplied with a 12-36 V dc power supply with a 5 wire, solid state relay output, with wire selectable dynamic blanking function. The test input in the SGT may be used for either disabling or enabling the transmitting power temporarily for test purposes.

The advanced automatic signal-tracking (AST) feature ensures that no onsite set up or adjustments are required. The signal level of each individual channel is adjusted automatically, which compensates for misalignment and contamination during operation. Transmitter and receiver detectors are optically synchronised.

The SG 14 series features the Dynamic Sequential Blanking Function which allows the detectors to be positioned in the guide tracks of an industrial door, where the door travels directly in front of the protection area, interrupting the beams sequentially from top to bottom. The special feature ensures that the system can distinguish between the closing door and an object by ignoring the beams that are obstructed by the moving door whilst leaving the below remaining beams active to detect an object in the protection area.

Both the transmitter and receiver detectors are protected against reverse polarity of power supplies, control input and output signals. The output is also protected against short circuit and inductive loads.
All products include a 3-year worldwide warranty.

Quick Search

Or

Product Finder

Find the Telco product type you're looking for with the help of criteria search filters in the Telco product finder

Open Product Finder

We use cookies to personalize content and to analyze our traffic. Please decide if you are willing to accept cookies from our website.